瑞士制造 精密品质

TalkBox 声学信号发生器

TalkBox 是用于疏散和广播系统语言传输指数测量的声学信号发生器,也可用于电话会议或其他音频系统的电平调整。它允许进行完整的终端至终端测量,对从演讲者麦克风到听众耳朵的语言传输指数 STIPA 进行评估。

  • 声学信号发生器
  • 语言传输指数 STIPA
  • 参考声源扬声器
  • 从 100 Hz 至 10 kHz 极优的平坦度 ±1 dB
  • 经校准的输出
  • 高声压级输出时也拥有极低的本底噪声

为你介绍 TalkBox

TalkBox 模拟人类演讲者(60 dBA @ 1m,依据 IEC 60268-16 标准)发出 STIPA 测试信号和语音信息。另外,它还提供许多测试信号,如正弦波,粉噪声,白噪声和延迟测试信号。

无与伦比的品质

TalkBox 尺寸近似人类头部,基于固态信号发生器。它完美的均衡了STIPA 测试信号的频率响应,确保了内置放大器和精密扬声器的最佳表现。提供的许多测试信号和用户自定义信号可精确输出,用于不同的校准应用。

TalkBox 按照最新标准设计,只为呈现可靠测量结果。它能在 100 Hz 到 10 kHz 范围内发出尽可能低失真的纯净测试信号。这一切确保了测量结果的可重复和精确性。

功能

  • 单独均衡

    NTi Audio TalkBox 装备有精密的宽频带扬声器。为保证在相关的频率范围上精度达到 ±1 dB 的完美平坦度和最高的品质要求,每台 TalkBox 采用先进的 FIR 滤波与 DSP 技术进行单独的均衡以达到精确的输出。在宽范围内辐射的特性符合 ITU-T P.51 标准。

    Talkbox Typical Response
  • 经校准的输出

    IEC 60268-16 标准要求模拟扬声器在 1 米距离能输出 60 dBA 的声压级。TalkBox 声压经过校正以符合此标准。为避免人为操作错误,TalkBox 没有设计音量控制。

  • 伦巴效应(Lombard Effect)

    紧急的情况下人的声音普遍会变高,此现象被称为伦巴效应(Lombard effect),此时 STIPA 信号需增加 10 dB(1 米处 70 dBA)。

  • 多样测试信号

    TalkBox 还能发出各种测试信号:参考语音、白噪声、粉红噪声、1 kHz 正弦波以及用于延迟时间测量的啁啾声。自定义信号可以存储到 CF 卡上,实现无缝循环播放。

  • 平衡的线输入/输出

    任何外部信号都可以通过平衡输入接口接入 TalkBox。内置 DSP 实时处理并通过扬声器无缝循环播放。

    使用平衡线输出,TalkBox 立刻变身为信号发生器,这完全消除了采用便携式 CD 播放器作为 STIPA 信号源的采样频率偏移问题。

    Talkbox Rear View
  • 多样测试信号

    TalkBox 还能发出多种不同信号:白噪声,粉噪声,1 kHz 正弦波信号和用于延迟测量的三角波信号等。用户也可以将自己的信号存储在 CF 卡中无缝循环播放。

  • 麦克风支架安装

    NTi Audio TalkBox 测试时能使用通用的麦克风支架放置在麦克风的正前方 ,即演讲者的位置 。通用的麦克风支架可安装在箱子的底部。

应用

    Speech Intelligibility STIPA

    Assess speech intelligibility with confidence.

    了解更多
    Stipa Dev Img

    室内声学

    测量、评估和优化空间声品质

    了解更多

    环境噪声监测

    功能区和厂界噪音等的短期或长期测量

    了解更多
    Environmental Noise

    职业噪声

    工作场所噪声暴露级和时间平均

    了解更多
    Occupational Noise

软件

  • 数据分析处理器

    用于分析和报告声压级数据的计算机软件,支持有调声和脉冲声、累计百分数声级和评价声级等的计算。
    了解更多

专家认可

    As a research laboratory invested in supporting communities through real time noise monitoring,  I am very happy to exclusively use NTi instruments. Not only are the robust, easy to use, and provide high quality data, the customer service is outstanding and their team will work with you to find the most cost effective and appropriate solutions needed for problems ranging from easy to difficult.

    User
    Erica D. Walker MSc, ScD, RGSS Assistant Professor of Epidemiology, Brown University School of Public Health
    Bild

    I’ve been using the XL2 for over 15 years for short-term and long-term measurements in all kinds of indoor and outdoor environments all across the country. The meter gets me what I want, when I need it. It’s not only the best value for acoustical measurements, it’s the best tool period. I bet my company and reputation on XL2 results and it has not let me down. You would be crazy not to consider adding NTi instruments to your toolkit.

    User
    Herb Singleton, P.E., INCE Bd. Cert., President, Cross-Spectrum Acoustics
    Bild

    We at Constructure GmbH use two XL3 sound level meters for noise monitoring during demolition work. We are very satisfied with these highly user-friendly instruments, the online monitoring in the MeasurEye Cloud, the good advice and qualified support. Factory calibrations at NTi Audio are also handled very smoothly and without complications.

    User
    Markus Rost, Managing Director, Constructure GmbH
    Bild

全球顶尖工程师
共同选择