瑞士制造 精密品质

十二面体声源扬声器

全指向性 DS3 十二面体扬声器(球形声源)是用于房间和建筑声学测量的轻便却强大的信号源。坚若磐石的 DS3 和可遥控的 PA3 功放组成了专业的十二面体声源扬声器套件。经优化的频谱能传输高水平的均衡声信号,符合 GB/T 19889,ISO 16283 和 ISO 3382 标准。

  • DS3 十二面体扬声器
  • PA3 功放
  • 瑞士品质
  • 声学平坦的频率响应
  • 最大声功率 120.5 dB
  • 远程控制
  • 连续工作时长 > 1 小时

细节至上

概览

十二面体声源扬声器套件包含 DS3 十二面体扬声器以及 PA3 功率放大器,它是为专业人士打造的测量利器,应对房间和建筑声学测量任务游刃有余。经优化的设计,领先的精度,使用轻巧等一系列优势让它独一无二。

DS3 十二面体扬声器内置了十二支专门设计的高品质扬声器,确保能发出一致的全指向声学测试信号。PA3 功放驱动 DS3,发出均衡的粉噪声信号。PA3 和 DS3 的组合能产生自由场下声学平坦的粉噪声。

Nti Waves

DS3 + PA3

  • DS3 十二面体声源扬声器

    十二面体声源扬声器是极其轻便却性能强大,稳定性高的信号源。仅 7.5 千克的重量却能发出高达 120.5 dB 的声功率级,DS3 非常适用于现场测量。

    它能有效散热,连续数小时稳定工作。坚固的格栅有效防止在运输和作业环境下对振膜的损伤。DS3 参考声源确保了测量结果的精确。

  • PA3 功率放大器

    便携的 PA3 功放内置了含均衡器的 DSP 信号发生器。它与 DS3 十二面体扬声器结合,能发出声学响应平坦的粉噪声。均衡后确保了 ISO 16283-1 中要求发射声在连续 1/3 倍频程段偏差 ≤ 8 dB 的要求。它还提供用于最大声功率输出的测试信号和外部音频输入接口。

    所有的操控部件都排列在倾角设计的面板上且带有指示灯,即便在站立时也能轻松的操作。对于某些低频测量,还可以连接有源低音炮。通过遥控器,在测量房间外就能实现开关信号的操作。

可用于十二面体声源的户外电源

无需市电,自主运行

制造商型号工作时长(小时)*电压(V,交流)容量(Wh)重量(kg)参考
GoalzeroYeti 500X1.61205055.9Link
JackeryExplorer 5001.61105126.1Link
Anker535 PowerHouse1.62205127.5Link
EcoflowDeltamini2.912088210.7Link

* 搭配 PA3 功放

配置信息

  • 十二面体声源扬声器套件

    包含

    • 内置信号发生器的 PA3 功率放大器
    • DS3 十二面体声源
    • DS3 扬声器支架

PA3 - 拖住旋转

⟵ ✦ ⟶

应用

    室内声学

    测量、评估和优化空间声品质

    了解更多

    建筑声学

    可靠精密的建筑隔声测量和评估系统

    了解更多

    环境噪声监测

    功能区和厂界噪音等的短期或长期测量

    了解更多
    Environmental Noise

    职业噪声

    工作场所噪声暴露级和时间平均

    了解更多
    Occupational Noise

软件

  • 数据分析处理器

    用于分析和报告声压级数据的计算机软件,支持有调声和脉冲声、累计百分数声级和评价声级等的计算。
    了解更多
  • 建筑隔声报告软件

    PC software for sound insulation measurements, analysis…
    了解更多

专家认可

    As a research laboratory invested in supporting communities through real time noise monitoring,  I am very happy to exclusively use NTi instruments. Not only are the robust, easy to use, and provide high quality data, the customer service is outstanding and their team will work with you to find the most cost effective and appropriate solutions needed for problems ranging from easy to difficult.

    User
    Erica D. Walker MSc, ScD, RGSS Assistant Professor of Epidemiology, Brown University School of Public Health
    Bild

    I’ve been using the XL2 for over 15 years for short-term and long-term measurements in all kinds of indoor and outdoor environments all across the country. The meter gets me what I want, when I need it. It’s not only the best value for acoustical measurements, it’s the best tool period. I bet my company and reputation on XL2 results and it has not let me down. You would be crazy not to consider adding NTi instruments to your toolkit.

    User
    Herb Singleton, P.E., INCE Bd. Cert., President, Cross-Spectrum Acoustics
    Bild

    We at Constructure GmbH use two XL3 sound level meters for noise monitoring during demolition work. We are very satisfied with these highly user-friendly instruments, the online monitoring in the MeasurEye Cloud, the good advice and qualified support. Factory calibrations at NTi Audio are also handled very smoothly and without complications.

    User
    Markus Rost, Managing Director, Constructure GmbH
    Bild

全球顶尖工程师
共同选择